1

GM-3-1 Vertical Centers Attachment

Call!

The GM-3-1 High Centers attachment is mounted on the tailstock slide of the GM-3 Basic Unit.  The lower dead 60 degree male center mounts in the tapered socket of the basic unit. The upper center is spring loaded with...

2

GM3-3 Bevel Gear Attachment

Call!

GM-3-3 Bevel Gear Attachment is a right angle face plate that mounts on the GM-2 basic unit and provides an arbor mount that is 90 degrees (horizontal) to the mating arbor.  Attachments cast iron material and its mass provides ...

3

GM-3-2 Worm Adapter

Call!

The GM-3-3 Worm Adapter mounts on the GM-3-3 Bevel Gaar Adpater that locates on the GM-3 Gearmaster basic unit.  Attachment mounts worms and master worms that locate between centers at cross axis to the mating gear or master gear.&n...

4

GM-3 Gearmaster

Call!

The GM-3 Gearmaster Dual Flank Composite Gear Tester consists of an accurately machined solid cast iron base which carries two slides: Headstock (indicating slide) and Tailstock (fixed/adjustable slide).  Unit will check (2) gear...

5

Worm Adapter

Call!

The GM-2-2 Worm Adapter mounts on the GM-2-3 Bevel Gaar Adpater that locates on the GM-2 Gearmaster basic unit.  Attachment mounts worms and master worms that locate between centers at cross axis to the mating gear or master gear.&n...

6

GM-2-3 Bevel/Face Gear Attachment

Call!

GM-2-3 Bevel Gear Attachment is a right angle face plate that mounts on the GM-2 basic unit and provides an arbor mount that is 90 degrees (horizontal) to the mating arbor.  Attachments cast iron material and its mass provides ...

7

GM-2-1 Vertical Centers Attachment

Call!

The GM-2-1 High Centers attachment is mounted on the tailstock slide of the GM-2 Basic Unit.  The lower dead 60 degree male center mounts in the tapered socket of the basic unit. The upper center is spring loaded with...

8

GM-2 Gearmaster

Call!

The GM-2 Gearmaster Dual Flank Composite Gear Tester consists of an accurately machined solid cast iron base which carries two slides: Headstock (indicating slide) and Tailstock (fixed/adjustable slide).  Unit will check (2) gear...

9

Mini Gear Tester

Call!

Mini Composite Gear for the parallel axis inspection of gears that locate from bores. Headstock is mounted on reed springs with the measuring pressure pre-set to 16 ounces. Unit is provided with a .0001 or .002mm grad. dial indicator.